---
title: "HORIZONTAL LAMINAR FLOW CABINET – FLH MODEL"
description: "Complete protection for work materials."
url: https://tdi.es/en/producto/horizontal-laminar-flow-cabinet-flh-model/
date: 2026-05-07
modified: 2026-05-07
author: "juan"
image: https://tdi.es/wp-content/uploads/2023/11/FLH-V2-2026-03-23-18-59-30.jpg
type: product
lang: en
product_type: simple
currency: EUR
availability: instock
---

# HORIZONTAL LAMINAR FLOW CABINET – FLH MODEL

- Equipped with an overload-protected, exceptionally quiet centrifugal motor.

- Recirculated air is filtered through an H14 HEPA absolute filter (99.995% efficiency at MPPS, EN1822 standard) and delivered to the work area at a velocity of 0.5 m/s ± 0.1.

- The work area maintains laminar flow conditions with ISO 5 air purity (according to ISO 14644) or Class 100 (according to Fed. Std. 209).

- Work surface constructed of AISI 304 stainless steel.

- Microprocessor-controlled cabinet with updatable FLASH memory and an external display for easy viewing of the cabinet’s control parameters (speeds, flow rates, and plenum pressure).

- The cabinet is equipped with an easy-to-use touch panel for controlling white/ultraviolet lighting, an internal power outlet, a gas valve (optional), and parameters.

- Automatic electronic motor speed control system to adapt to progressive filter saturation and safety conditions.

- Operating voltage 220 V 50 Hz. Maximum current consumption 2 A. (approx. 500 W)

- LED and ultraviolet lighting.

- The cabin comes standard with a UV light; 2 IP 55-rated 110-220-volt electrical outlets for 1,000 W each (total 2,000 W).

 

*“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for reference only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit it.”*