---
title: "VERTICAL LAMINAR FLOW CABINET AND PCR &#8211; LFC800 X Models"
description: "Vertical Laminar Flow Cabinet designed to provide complete protection for the work material. Equipped with a centrifugal motor protected against overloads and exceptionally quiet."
url: https://tdi.es/en/producto/vertical-laminar-flow-cabinet-and-pcr-lfc800-x-models/
date: 2026-04-15
modified: 2026-05-07
author: "juan"
image: https://tdi.es/wp-content/uploads/2023/11/LFC-800-A-7.jpg
type: product
lang: en
product_type: simple
currency: EUR
availability: instock
---

# VERTICAL LAMINAR FLOW CABINET AND PCR &#8211; LFC800 X Models

- Vertical Laminar Flow Cabinet designed to provide complete protection for the work material. Equipped with a centrifugal motor protected against overloads and exceptionally quiet.

- The LFC800 series is available in two models: Automatic and Manual.

- The air is first pre-filtered through a G3 pre-filter and then filtered by an H14 HEPA absolute filter (99.995% efficiency at MPPS, EN 1822 standard) and delivered to the work area at a velocity of 0.45 m/s ± 0.1. The air is exhausted to the outside through the front.

- The work area maintains laminar flow conditions with ISO 5 air purity (according to ISO 14644) or Class 100 (according to Fed. Std. 209).

- Work surface constructed of AISI 304 stainless steel.

- The LFC800A model is microprocessor-controlled with an upgradeable FLASH memory and an external display for easy viewing of the cabinet’s control parameters (speeds, flow rates, and plenumpressure).

- The cabinet is equipped with an easy-to-use touch panel for controlling white/ultraviolet lighting, an internal power outlet, and parameters.

- Automatic electronic motor speed control system to adapt to progressive filter saturation and safety conditions.

- LED and ultraviolet lighting.

- Operating voltage 220 V 50 Hz. Maximum current consumption 2 A. (approx. 500 W)

- The cabinet comes standard with a UV light and a 220-volt electrical outlet.

 

**Optional Accessories:**

- Vacuum and gas inlet

- Unit support table

- 3 UV tubes for PCR

 

 

*“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for guidance only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit it.”*
