Description

• The FHX series fume hoods are designed for modular laboratories where safe ventilation is required, minimizing exposure to and inhalation of chemical contaminants.
• It is constructed of epoxy-coated steel. The side panels are made of glass. The front panel is angled at 10° for user comfort.
• The work surface is removable for easy cleaning and is constructed of materials highly resistant to chemicals.
• Manually sliding front glass panel.
• Protective barrier in the work area with a flow velocity greater than 0.5 m/s.
• Special activated carbon filters, and absolute filters can be optionally installed, depending on the contaminants to be retained. A tube up to 4 meters long can be connected to the outlet and extended to the outside without the need for a booster fan.
• Water connection and drain, a gas connection, and two 220 V outlets.
• Microprocessor-controlled cabinet for adjusting the speed.
• Easy-to-use 7″ touch panel for controlling white/ultraviolet lighting, an internal power outlet, a gas valve, and parameters.
• Fluorescent and UV lighting.
• Operating voltage 220 V / 50 Hz. Optional 110 V / 60 Hz. Maximum current consumption 6 A (approx. 1300 W).
• The cabinet comes standard with a UV light; IP55 electrical outlet for 1000 W loads, water inlet, gas inlet, sink, and support table.

“All information, specifications, dimensions, and electrical data shown in TDI’s sales materials and data sheets are for reference only and are not binding; therefore, they are subject to change based on each customer’s needs and provided that applicable regulations permit such changes.”