Description

AIR:

• Partial air recirculation in accordance with regulations: 30% exhaust and 70% recirculation.
• The work area maintains laminar flow conditions with ISO 4 air purity (according to UNE EN ISO 14644) or Class 10 (according to Fed. Std. 209).
• The recirculated air is filtered through a ULPA U15 absolute filter (99.9995% MPPS efficiency) or HEPA H14 filter (99.995% MPPS efficiency), in accordance with UNE EN 1822, and is delivered to the work area at a velocity between 0.25 and 0.50 m/s (in accordance with UNE EN ISO 14644).
• The air expelled to the outside is filtered by a dedicated ULPA U15 or HEPA H14 absolute filter in accordance with the UNE EN 1822 standard.
• Protective barrier in the work area with a velocity greater than 0.50 m/s.

CONSTRUCTION:

• Work area constructed of AISI 304 stainless steel. Optional: AISI 316L.
• Sliding front glass panel with alarm position. Raises or lowers manually or electronically. Features an anti-pinch function with obstacle detection during glass closure.
• The glass features a special guide that improves sealing and safety during sliding.
• Microprocessor-controlled cabinet with updatable FLASH memory and external display for easy viewing of the cabinet’s control parameters (speeds, flow rates, plenum pressure, ejection barriers, humidity, temperature, etc.).
• The cabinet is equipped with an easy-to-use touchscreen panel with a security PASSWORD for controlling and powering on the unit.
• Alarms for detecting problems in the air supply system and the negative pressure protection barrier, as well as door opening, via voice alerts and visual indicators on the screen.
• Pre-installation for decontamination with Vaporized Hydrogen Peroxide (VHP)
• Adjustable white LED lighting and UV-free.
• Operating voltage 110-220 V, 50/60 Hz. Maximum current consumption 3 A (approx. 750 W).
• The interior of the cabinet includes a UV light; 2 IP 55-rated 110-220 volt electrical outlets for 1,000 W each (total 2,000 W).

“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for guidance only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit such changes.”