Description

AIR:

• Recirculated air is filtered through a ULPA U15 absolute filter (99.9995% MPPS efficiency) or a HEPA H14 filter (99.995% MPPS efficiency), in accordance with UNE EN 1822, and is delivered to the work area at a velocity between 0.25 and 0.50 m/s (in accordance with UNE EN ISO 14644).
• 100% exhaust air. Equipped with two motors, one for supply and another external motor for complete cabin exhaust.
• The air expelled to the outside is filtered by a dedicated ULPA U15 or HEPA H14 absolute filter in accordance with the UNE EN 1822 standard.
• The work area maintains laminar flow conditions with ISO 4 air purity (according to UNE EN ISO 14644) or Class 10 (according to Fed. Std. 209).
• Protective barrier in the work area with a velocity greater than 0.50 m/s.

CONSTRUCTION:

• Work area constructed of AISI 304 stainless steel. Optional: AISI 316L.
• The cabinet has a depth of 795 mm, facilitating passage through doors to its installation location.
• Sliding front glass panel with alarm position. Raises or lowers manually or electronically. Features an anti-pinch function with obstacle detection during glass closure.
• The safety opening glass is 5 mm thick with UV protection and anti-reflective coating, with an incline of up to 10° to facilitate the user’s viewing of the samples and provide a full view of the work surface.
• Glass with a special guide that improves sealing and safety during sliding.
• Microprocessor-controlled cabinet with upgradeable FLASH memory and external display for easy viewing of the cabinet’s control parameters (speeds, flow rates, plenum pressure, exhaust barriers, humidity, temperature, etc.), user-friendly touchscreen with a security PASSWORD for controlling and powering on the unit.
• Alarms for detecting problems in the drive system and the negative pressure protective barrier, as well as door opening, via voice alerts and/or visual indicators on the screen.
• Pre-installation for decontamination with Vaporized Hydrogen Peroxide (VHP)
• Adjustable white LED lighting and UV-free.
• Operating voltage 110-220 V, 50/60 Hz. Maximum current consumption 3 A (approx. 450 W).
• The interior of the cabin includes a UV light; 2 IP 55-rated 110-220-volt electrical outlets for 1,000 W each (total 2,000 W).
• Installation requires 1 exhaust fan and its ductwork.

Optionally, the booth can be computerized for hardware integration:

• 1 USB port
• 1 HDMI port
• 1 DP Internet port
• 1 21.5-inch monitor
• Keyboard stand
• Computer stand

“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for guidance only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit such changes.”