Description

The FHP series fume hoods are designed for modular laboratories where safe ventilation is required, minimizing exposure to and inhalation of chemical contaminants.

• Constructed of POLYPROPYLENE. The interior features white PP porcelain walls with excellent resistance to acids and bases.
• The work area features a drain pan for liquid disposal, constructed from phenolic resin materials that are highly resistant to chemicals.
• Manually sliding front glass panel.
• Air is swept across the front at a speed > 0.4 m/s and expelled to the outside. Special activated carbon filters and absolute filters can be optionally installed, depending on the contaminants to be retained. A hose up to 4 meters long can be connected to the outlet and extended to the outside without the need for a booster fan.
• Standard features include a water and drain connection, a gas connection, and two 220 V IP55 outlets. Both the water and vacuum valves are controlled from outside the unit.
• Microprocessor-controlled for adjusting speed across 6 levels.
• Equipped with an easy-to-use LCD touchscreen for controlling white lighting and displaying parameters.
• Axial motor, adjustable speed, and resistant to acids and bases.
• Operating voltage 110-220 V +/-10%. 50/60 Hz. Maximum current consumption 6 A (approx. 1300 W). The unit alone consumes 360 W max.

“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for reference only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit it.”