Description

Air is drawn in from the outside and pre-filtered, then filtered through a HEPA (H14) filter to the work surface at a velocity of 0.4 m/s or greater (in accordance with international standards), ensuring that no particles enter the work area and providing total product protection, even under difficult working conditions.

The units operate with a Class 100 (Fed. Std. 209E) or ISO 5 UNE EN ISO 14644 sterile vertical laminar flow. Finally, the airflow is expelled from the front of the unit, creating a positive pressure barrier.

• It is constructed of bent steel and painted with high-resistance paint.
• Washable pre-filter, made of polyamide materials, with 90% efficiency for particles 5 microns in diameter. Located at the top of the unit.
• HEPA H14 filter with 99.999% efficiency for particles 0.3 microns in diameter (EN 1822).
• High-capacity, ultra-quiet EC motor capable of providing both laminar flow and positive pressure.
• Manual control system with motor operation indicator, control of operating and idle speeds. This panel also controls the white LED lighting and the UV light via a switch.
• Front-mounted LED tube lighting to prevent the operator from casting shadows on the workpiece.
• Stainless steel work surface.
• Green Line: Low power consumption thanks to the installation of EC motors and LED lighting; the unit can be placed in standby mode while maintaining sterility.

Options:

• Analog pressure gauge for monitoring filter saturation.
• Gas and vacuum valves. Internal 220 V outlet.

“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for guidance only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit it.”