Description

• Vertical Laminar Flow Cabinet designed to provide complete protection for the work material. Equipped with a centrifugal motor protected against overloads and exceptionally quiet.
• The LFC800 series is available in two models: Automatic and Manual.
• The air is first pre-filtered through a G3 pre-filter and then filtered by an H14 HEPA absolute filter (99.995% efficiency at MPPS, EN 1822 standard) and delivered to the work area at a velocity of 0.45 m/s ± 0.1. The air is exhausted to the outside through the front.
• The work area maintains laminar flow conditions with ISO 5 air purity (according to ISO 14644) or Class 100 (according to Fed. Std. 209).
• Work surface constructed of AISI 304 stainless steel.
• The LFC800A model is microprocessor-controlled with an upgradeable FLASH memory and an external display for easy viewing of the cabinet’s control parameters (speeds, flow rates, and plenumpressure).
• The cabinet is equipped with an easy-to-use touch panel for controlling white/ultraviolet lighting, an internal power outlet, and parameters.
• Automatic electronic motor speed control system to adapt to progressive filter saturation and safety conditions.
• LED and ultraviolet lighting.
• Operating voltage 220 V 50 Hz. Maximum current consumption 2 A. (approx. 500 W)
• The cabinet comes standard with a UV light and a 220-volt electrical outlet.

Optional Accessories:

• Vacuum and gas inlet
• Unit support table
• 3 UV tubes for PCR

“All information, specifications, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for guidance only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit it.”