Description

• Vertical Laminar Flow Cabinet with recirculation, equipped with an overload-protected and exceptionally quiet centrifugal motor.
• The air is first pre-filtered through a G3 pre-filter, then filtered by an H14 HEPA absolute filter (99.995% efficiency at MPPS, EN 1822 standard), and delivered to the work area at a velocity of 0.50 m/s ± 0.1.
• The work area maintains laminar flow conditions with ISO 4 air purity (according to ISO 14644) or Class 10 (according to Fed. Std. 209).
• Work surface constructed of AISI 304 stainless steel, optionally AISI 316L.
• Manually sliding front glass panel.
• The cabinet is controlled via an upgradeable FLASH memory and an external display for easy viewing of the cabinet’s control parameters (speeds, flow rates, and plenum pressure).
• The cabinet is equipped with an easy-to-use touch panel with a security PASSWORD for controlling and powering on the unit.
• Automatic electronic motor speed control system to adapt to progressive filter saturation and protection conditions.
• Dimmable LED lighting and ultraviolet light.
• Operating voltage 220 V 50 Hz. Maximum current consumption 2 A. (approx. 500 W).
• The cabinet comes standard with a UV light; 2 electrical outlets rated at 110-220 volts, IP 55 rating, for 1,000 W each (total 2,000 W).

Optional Accessories:

• Gas/Vacuum inlet
• Base support

“All information, features, dimensions, and electrical data shown in TDI’s commercial documents and data sheets are for guidance only and are not binding; therefore, they are subject to change according to each customer’s needs and provided that applicable regulations permit it.”